Difference between revisions of "Pinouts"
From veswiki
(Created page with "'''System Fairchild cartridge pinout''' <pre> 1 GND 2 GND 3 D0 4 D1 5 /INTREQ 6 ROMC0 7 ROMC1 8 ROMC2 9 D2 10 ROMC3 11 D3 12 ROMC4 13 PHI 14 D4 15 WRITE 16 D5 17 D6 18 D7 19 ...") |
|||
| Line 1: | Line 1: | ||
| − | + | == System Fairchild cartridge pinout == | |
| + | |||
| + | {| class="wikitable" style="text-align: center;" | ||
| + | ! colspan="2" |[[Image:Cartridge pinout.png]] | ||
| + | |- | ||
| + | |1 GND | ||
| + | |12 ROMC4 | ||
| + | |- | ||
| + | |2 GND | ||
| + | |13 PHI | ||
| + | |- | ||
| + | |3 D0 | ||
| + | |14 D4 | ||
| + | |- | ||
| + | |4 D1 | ||
| + | |15 WRITE | ||
| + | |- | ||
| + | |5 /INTREQ | ||
| + | |16 D5 | ||
| + | |- | ||
| + | |6 ROMC0 | ||
| + | |17 D6 | ||
| + | |- | ||
| + | |7 ROMC1 | ||
| + | |18 D7 | ||
| + | |- | ||
| + | |8 ROMC2 | ||
| + | |19 +5V | ||
| + | |- | ||
| + | |9 D2 | ||
| + | |20 +5V | ||
| + | |- | ||
| + | |10 ROMC3 | ||
| + | |21 Not Connected | ||
| + | |- | ||
| + | |11 D3 | ||
| + | |22 +12V | ||
| + | |} | ||
| + | |||
| + | == Controller connector pinout == | ||
| + | |||
| + | On the Fairchild VES/Channel F, Luxor VES, SABA etc with a fixed controller the pinout of a hand controller is this: | ||
| + | (in the order of the internal 18 pole connector) | ||
| + | <pre> | ||
| + | 1: black: push down | ||
| + | 3: brown: pull up | ||
| + | 5: red: clockwise | ||
| + | 7: orange: counter-clockwise | ||
| + | 9: yellow: forward | ||
| + | 11: green: backwards | ||
| + | 13: blue: left | ||
| + | 15: grey: right | ||
| + | 18: white: ground | ||
| + | |||
| + | Skipped numbers are empty in the connector, 16 is plugged. | ||
| + | Colors vs function are very helpful when resoldering wire in the hand controller. | ||
| + | </pre> | ||
<pre> | <pre> | ||
| − | 1 | + | Channel F II, Grandstand, Nordmende, Luxor 9 pin D-SUB connector |
| − | 2 | + | DE9F connector watching the mating end of connector: |
| − | 3 | + | |
| − | 4 | + | 5 4 3 2 1 |
| − | 5 | + | 9 8 7 6 |
| − | 6 | + | |
| − | 7 | + | 1: counter-clockwise |
| − | 8 | + | 2: clockwise |
| − | 9 | + | 3: pull up |
| − | + | 4: push down | |
| − | + | 5: right | |
| − | + | 6: forward | |
| − | + | 7: back | |
| − | + | 8: left | |
| − | + | 9: ground | |
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
</pre> | </pre> | ||
| − | |||
Revision as of 17:22, 1 September 2016
System Fairchild cartridge pinout
| |
|---|---|
| 1 GND | 12 ROMC4 |
| 2 GND | 13 PHI |
| 3 D0 | 14 D4 |
| 4 D1 | 15 WRITE |
| 5 /INTREQ | 16 D5 |
| 6 ROMC0 | 17 D6 |
| 7 ROMC1 | 18 D7 |
| 8 ROMC2 | 19 +5V |
| 9 D2 | 20 +5V |
| 10 ROMC3 | 21 Not Connected |
| 11 D3 | 22 +12V |
Controller connector pinout
On the Fairchild VES/Channel F, Luxor VES, SABA etc with a fixed controller the pinout of a hand controller is this: (in the order of the internal 18 pole connector)
1: black: push down 3: brown: pull up 5: red: clockwise 7: orange: counter-clockwise 9: yellow: forward 11: green: backwards 13: blue: left 15: grey: right 18: white: ground Skipped numbers are empty in the connector, 16 is plugged. Colors vs function are very helpful when resoldering wire in the hand controller.
Channel F II, Grandstand, Nordmende, Luxor 9 pin D-SUB connector
DE9F connector watching the mating end of connector:
5 4 3 2 1
9 8 7 6
1: counter-clockwise
2: clockwise
3: pull up
4: push down
5: right
6: forward
7: back
8: left
9: ground
