Modding

System Fairchild composite video modification

Working mod schematic

Construction can be used for many other machines as well.

Example PCB

Example of PCB using SMD components.

Hookup

Fairchild Video Entertainment System / Channel F

Connect composite in wire to the resistor by the RF box where the black clamp is placed. Audio can be picked from speaker output using about 150kOhm in series.

Channel F II

Available 5V shown with red and blue wires in top right position and composite signal source taken with a red clamp on a resistor by the LED.
Audio hookup point is any of the marked connection points. Last circled jumper should be opened to remove annoying moving patterns over colored areas.

SABA Videoplay 2

5V and ground is hooked up on the 5V regulator, video is taken from capacitor pin (yellow wire).