From veswiki
Revision as of 21:41, 26 July 2019 by E5frog (talk | contribs)
Jump to: navigation, search

System Fairchild composite video modification

Working mod schematic

Construction can be used for many other machines as well.
Channel F composite mod schematic.jpg

Example PCB

Composite mod rendered PCB top.pngComposite mod rendered PCB bottom.png
Example of PCB using SMD components.


Fairchild Video Entertainment System / Channel F

Channel F composite hookup point.jpg
Connect composite in wire to the resistor by the RF box where the black clamp is placed. Audio can be picked from speaker output using about 150kOhm in series.

Channel F II

Channel F II composite video modification overview.jpg Channel F II composite mod detail.jpg
Channel F II composite mod audio.jpg Channel F II composite video modification jumper.jpg
Available 5V shown with red and blue wires in top right position and composite signal source taken with a red clamp on a resistor by the LED.
Audio hookup point is any of the marked connection points. Last circled jumper should be opened to remove annoying moving patterns over colored areas.

SABA Videoplay 2

SABA Videoplay 2 composite video mod hookup.jpg SABA Videoplay 2 composite mod second image.jpg
5V and ground is hooked up on the 5V regulator, video is taken from capacitor pin (yellow wire).