In the Channel F, VRAM is a 128x64 pixel ( 8192 x 2 bits / 2kByte ) portion of RAM in the console, that can only be accessed through the ports. A portion of this VRAM is used as the display on the television screen. Column 125 and 126 controls the palette for the row of VRAM it is written on. The rest of the VRAM is unused by the console, it can be written to but there's no way of reading it back, there's however Schach RAM available in some cases depending on your cartridge platform.
Regarding the hardware the DRAM is usually Fairchild's own with their own markings, it's an MK4027 compatible DRAM in the first generation of machines (a lot of logic chips) and a MK4015N compatible DRAM in the second generation (VLSI circuit). Good to know if you're looking for spare parts in case you have odd colored bars in your display.
Pinout of the
The portion of VRAM which is displayed starts at about column 4, row 4 and expands 102 pixels horizontally and 58 pixels vertically, giving a resolution of 102x58 pixels. This resolution is used in the MESS emulation system. However, most CRT televisions display a smaller resolution horizontally because of overscan, so the safe area to use is about 95x58 pixels. Many TV sets are adjusted wrong so that picture is offset in one or two directions. Zoomed and off center is what to normally expect, more or less. Note that the resolution is a lot closer to widescreen (16:9) than standard definition (4:3). On a TV from the 70's or 80's pixels are rectangular, standing on the short edge. In widescreen mode they are close to perfect squares.
A screenshot from MESS displaying both the visible and invisible parts of VRAM, the other one shows the same screen with the safe area marked.
This is the same image in the approximate aspect your TV will show the image: