Difference between revisions of "Status register"
m (1 revision)
Latest revision as of 21:23, 16 November 2012
The status register is an 8-bit register used by the F8 to store the results of a previous operation, or as a flag to allow interrupts. Only the lower 5 bits of the register are used. In the LR opcode, the status register can be accessed using the letter W, though it can only be transferred back and forth from the register J, or scratchpad register 9.
The status register is primarily affected by mathematical opcodes, such as addition or any binary logic. When branching, the opcodes apply a bitmask to the status register and determine whether the condition is true or not.
Status Register Bits
This table breaks down the status register bit-by-bit (LSB is bit 0):
|0||Sign||Carries the sign of the last operation (positive, negative)|
|1||Carry||Set if the last operation resulted in a carry.|
|2||Zero||Set if the value of the last operation was 0.|
|3||Overflow||Set if the last operation resulted in too large a number|
|4||ICB||Set if interrupts are to be enabled (use EI, DI)|